ZETAGS Cloud Print for P.C – Setup Driver

OverVIEW

ZETAGS Cloud Print works in your Google Chrome web browser.
Your tags print to a pdf file and then use the default driver settings to send to your printer. For this reason your default settings should be setup before you try to print.

ZETAGS Screen Shot 2020 Cloud Print
ZETAGS Screen Shot 2020 Cloud Print

1. ADJUST THE PAGE SIZE

1A: Go to Control Panel and Printers and Devices. If you don’t know how you can use My Computer. Search Control Panel

ZETAGS Screen Shot 2021 Find Control Panel2

1B: From the settings screen CLICK “View devices and printers”

ZETAGS Screen Shot 2020 View Devices and Printers
1C: RIGHT CLICK the icon for your printer and LEFT CLICK “Printer Preferences”
ZETAGS Screen Shot 2021 Printer Preferences

1D: CLICK the “Page Setup” TAB and CLICK the “Edit” button

ZETAGS Screen Shot 2021 Printer Preferences Edit

1E: CLICK the “Page Setup” TAB and enter the roll width and label height.
You can also request this information from ZETAGS and CLICK OK

ZETAGS Screen Shot 2021 Printer Preferences Page Setup
ZETAGS Screen Shot 2021 Printer Preferences Page Setup

2. ADJUST THE HEAD TEMPERATURE OR DARKNESS

The darkness is set to print at low heat for paper by default.
For Polyester you will usually use the darkest setting as shown below.
If the print is still too light, decrease the speed.
If the print is too dark decrease the setting in small steps and re-test
ZETAGS can provide this information for you…

ZETAGS Screen Shot 2021 Printer Preferences Darkness and Speed
END.